2101 · 510 Cartridge

A 1.0 ml 510 cartridge at 65 mm long and 10.5 mm across, listed at 1.2 Ω on a ceramic core with a 4 × 2.0 mm oil inlet. That inlet figure is the first thing to check when moving a formulation across from another supplier — a thicker oil needs the wider port.

Packed 1,000 pcs per box, 5,000 pcs minimum per order. Oil inlet and resistance are settled at the sample stage rather than at the PO, because both change the fill behaviour more than the outer dimensions do.

Where it is used

• 1.0 ml retail cartridges
• Thick-oil formulations
• Markets capping cartridge volume at 1 ml

Compatibility and ordering

Oil inlet 4 × 2.0 mm Coil ceramic core

Press-type and screw-thread 510 bodies with a ceramic core, from 0.8 ml to 2.5 ml, including a CBD disposable and a preheating battery rod. The oil inlet on each SKU is the figure that decides whether a given oil will wick properly.

This model sits in 510 cartridges & atomizers, which holds 13 SKUs; the whole range is indexed on the catalogue page. Orders are quoted per model and per finish, and a mixed order across models is accepted as long as each model clears its own 5,000 pcs minimum.

Trade questions