KB Atomizer

A narrow 10.0 mm body at 67.5 mm long, offered at 1.0 ml or 0.5 ml fill, running 1.3 Ω on a ceramic core. The 4 × 1.6 mm inlet sits between the BC’s tight 1.2 mm and the 2.0 mm ports used on the wider cartridges.

1.3 Ω is a half-step above the 1.2 Ω used across most of this range, which is what a buyer usually reaches for when a battery runs slightly hot. 1,000 pcs per box, 5,000 pcs minimum.

Where it is used

• Slightly cooler draw at 1.3 Ω
• Two fill volumes on one body
• Medium-viscosity oil

Compatibility and ordering

Oil inlet 4 × 1.6 mm Coil ceramic core

Press-type and screw-thread 510 bodies with a ceramic core, from 0.8 ml to 2.5 ml, including a CBD disposable and a preheating battery rod. The oil inlet on each SKU is the figure that decides whether a given oil will wick properly.

This model sits in 510 cartridges & atomizers, which holds 13 SKUs; the whole range is indexed on the catalogue page. Orders are quoted per model and per finish, and a mixed order across models is accepted as long as each model clears its own 5,000 pcs minimum.

Trade questions