2416 Atomizer

One body, two lengths: 14 × 50 mm and 14 × 60 mm, offered at 1.0 ml or 2.0 ml fill, on a 1.2 Ω ceramic core with a 4 × 1.5 mm inlet. The 1.5 mm port sits between the BC’s tight inlet and the 2.0 mm used on the slim bodies.

Two lengths from one SKU is the reason to take it: a market that caps cartridge volume can use the short body and a market that does not can use the long one, on the same artwork. 1,000 pcs per box, 5,000 pcs minimum.

Where it is used

• Two body lengths from one SKU
• 1.0 ml-cap markets and open markets
• Medium-viscosity oil

Compatibility and ordering

Oil inlet 4 × 1.5 mm Coil ceramic core

Press-type and screw-thread 510 bodies with a ceramic core, from 0.8 ml to 2.5 ml, including a CBD disposable and a preheating battery rod. The oil inlet on each SKU is the figure that decides whether a given oil will wick properly.

This model sits in 510 cartridges & atomizers, which holds 13 SKUs; the whole range is indexed on the catalogue page. Orders are quoted per model and per finish, and a mixed order across models is accepted as long as each model clears its own 5,000 pcs minimum.

Trade questions